RH 253: HOW TO SET UP PRIMARY DNS SERVER

    TO SET UP PRIMARY DNS SERVER


 Set up static ip and host name for your machine



SERVER - Steps on server

1. yum install bind caching-nameserver -y
2. vim /etc/named.conf                            ->edit this file
3. named-checkconf   /etc/named.conf
4. cd /var/named
5. cp localhost.zone  forward.zone
6. vim forward.zone                               ->edit this file
7. named-checkzone  <domainname>   forward.zone
8. cp forward.zone reverse.zone
9. vim reverse.zone                               ->edit this file
10. named-checkzone  <domainname>   reverse.zone 
11.vim /etc/sysconfig/network-scripts/ifcfg-eth0 ->edit this file
      PEERDNS=no
12.service network restart
13.vim /etc/resolv.conf                          ->edit this file
14.service named restart
15.chkconfig named on


CLIENT - Steps on client

1. vim /etc/resolv.conf    ->edit the file
2.  dig       <hostname>
3.  host      <hostname>
4.  host      <IP>
5.  nslookup  <IP>
6.  nslookup  <hostname>




CONFIGURATION FILES


1.  forward.zone


$TTL    86400
@        IN SOA    server.matrix.com.     root (
                    42        ; serial (d. adams)
                    3H        ; refresh
                    15M        ; retry
                    1W        ; expiry
                    1D )        ; minimum

            IN NS        server.matrix.com.
server         IN A        192.168.0.59
client1         IN A        192.168.0.58
client2         IN A        192.168.0.57



2.  named.conf


options {
directory "/var/named";
};


zone "matrix.com"{
type master;
file "forward.zone";
};

zone "0.168.192.in-addr.arpa"{
type master;
file "reverse.zone";
};



3. resolv.conf


search matrix.com
nameserver 192.168.0.59



4.  reverse.zone


$TTL    86400
@        IN SOA    server.matrix.com.     root (
                    42        ; serial (d. adams)
                    3H        ; refresh
                    15M        ; retry
                    1W        ; expiry
                    1D )        ; minimum

            IN NS        server.matrix.com.
            IN A        192.168.0.59
59            IN PTR        server.matrix.com.
58            IN PTR        client1.matrix.com.
57            IN PTR        client2.matrix.com.




If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

RH 253: HOW TO CONFIGURE SPLIT DNS SERVER

        TO CONFIGURE SPLIT

IN MASTER

1. vim /var/named/chroot/etc/named.conf     ->edit this file
2. named-checkconf  /var/named/chroot/etc/named.conf
3. cd /var/named/chroot/var/named
4. cp forward.zone  external
5. vim external                     ->edit the file to change ips
6. chgrp named external
7. service named restart


From any internal ip
1. host server.matrix.com      ->wll find internal ip

From any external ip
1. host server.matrix.com      ->wll find external ip



CONFIGURATION FILES


1.  external-resolv


  search  example.com
nameserver 192.168.0.42


2.  masters-external


$TTL    86400
@        IN SOA    server.example.com.       root (
                    45        ; serial (d. adams)
                    3M        ; refresh
                    3M        ; retry
                    1W        ; expiry
                    1D )        ; minimum

            IN NS        server.example.com.
            IN NS        llc.subdomain.example.com.
server         IN A            192.168.10.42
slave         IN A            192.168.10.10
llc.subdomain    IN A            192.168.10.33
test         IN A            192.168.10.1


3. masters-named

acl "internal" { 192.168.0.42; 192.168.0.34; };
options {
directory "/var/named";
#allow-transfer { 192.168.0.10; };
};

view "internal" {
match-clients { "internal"; };
zone "example.com"{
type master;
file  "forward.zone";
};

zone "0.168.192.in-addr.arpa"{
type master;
file  "reverse.zone";
};
};

view "external"  {
match-clients { "any"; };
zone "example.com" {
type master;
file "external";
};
};



If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

RH 253: IP TABLES

1. TYPES OF IPTABLES

A.  FILTER
B.  NATC
C.  MANGLE

->  Types of Filter
A.  Forward
B.  Input
C.  Output

->  Types of NAT
A.  Pre-routing
B.  Post-routing
C.  Output

->  Types of Mangle
1.  Forward
2.  INPUT
3.  OUTPUT
4.  Pre-routing
5.  Post-routing



2. TYPES OF TARGET

1. Accept  
2. Drop
3. Log
4. Reject


--------->
-t  table 
-s source
-d destination
-i interface
-j target
--d  service's port num

---------->
-A Append
-F Flush
-R Replace
-D Delete
-L List
-I Insert



pkg    : iptables
daemon : iptables
file   : /etc/sysconfig/iptables

lokkit  ->Enable firewall





INPUT IPTABLES

1. To List all iptables
   iptables  -L

2. To Flush all iptables
   iptables  -F

3. To List only  Input iptables
   iptables  -t filter -L INPUT


4. No System can access any services in server using tcp connection .
   iptables -t filter -A INPUT -s 0.0.0.0/0 -j REJECT

5. To Control access to ping  for single IP to stop pinging(ICMP)

a> REJECT   ->Reject pinging with ACK
   iptables -t filter -A INPUT -s 192.168.0.20 -p icmp -j REJECT
   iptables -F


b> DROP  ->Drop pinging with no ACK
   iptables -t filter -A INPUT -s 192.168.0.20 -p icmp -j DROP
   iptables -F


c> LOG    ->Allow pinging + Log messages
   iptables -t filter -A INPUT -s 192.168.0.20 -p icmp -j LOG
   tailf /var/log/messages
   iptables -F


d> ACCEPT   ->Allow pinging
   iptables -t filter -A INPUT -s 192.168.0.20 -p icmp -j ACCEPT
  

6. To Control access to ping  for Entire N/W to stop ping(ICMP)
   iptables -t filter -A INPUT -s 192.168.0.0/24 -p icmp -j REJECT

7. To Deny everybody to access other than this network
   iptables -t filter -A INPUT -s! 192.168.0.0/24 -p icmp -j REJECT

8. To Number  the iptables
   iptables -t filter -L INPUT --line-numbers -n

9. To Delete individual iptable
   iptables -t filter -D INPUT 2

10. To Replace an iptables with other iptables
    iptables -t filter -R INPUT 2 -s 192.168.0.53 -p icmp -j REJECT
 
11. To Insert  iptables B/W 2 iptables
    iptables -t filter -I INPUT 2 -s 192.168.0.53 -p icmp -j REJECT


12. To Control access to ssh
iptables -t filter -A INPUT -s 192.168.0.20 -p tcp --dport 22 -j REJECT

13. To Control access to ftp
iptables -t filter -A INPUT -s 192.168.0.20 -p tcp --dport 21 -j REJECT

14. To Control access to pop3
iptables -t filter -A INPUT -s 192.168.0.20 -p tcp --dport 110 -j REJECT

15. To Control access to imaps
iptables -t filter -A INPUT -s 192.168.0.20 -p tcp --dport 993 -j REJECT


  OUTPUT IPTABLES EXAMPLES

1.TO Stop our server to ping to any machine
  iptables -t filter -A OUTPUT -s 192.168.0.28 -p  icmp -j DROP


2.TO Stop our server to ssh to any machine
  iptables -t filter -A OUTPUT -s 192.168.0.28 -p tcp --dport 22  -j DROP

3.TO Stop our server to ftp to any machine
  iptables -t filter -A OUTPUT -s 192.168.0.28 -p tcp --dport 21  -j DROP



 FORWARD  IP TABLES  EXAMPLES


1. Set 2 diff ips of 2 diff n/w in router/server
2. vim /etc/sysctl.conf
3. sysctl -p

-> To stop  Pinging b/w diff n/w. Though they pass thru routers

iptables -t filter -A FORWARD -s 10.0.0.20  -d 192.168.0.20 -p icmp -j REJECT

-> To stop  ssh b/w diff n/w.

iptables -t filter -A FORWARD -s 10.0.0.20  -d 192.168.0.20 -p tcp --dport 22 -j REJECT

-> To stop  ftp b/w diff n/w.
 
iptables -t filter -A FORWARD -s 10.0.0.20  -d 192.168.0.20 -p tcp --dport 21
 -j REJECT



    POSTROUTING OR SNAT

Anybody from public ip wants to connect to private ip. But they cant connect using public ip, So use routers private ip.

1. iptables -t nat -A POSTROUTING -j  SNAT --to-source 10.0.0.1

2. From 192.168.0.20
   # ssh 10.0.0.20
     w

3. iptables -t nat -L POSTROUTING
    
4. iptables -t nat -F POSTROUTING    






    PREROUTING OR DNAT

Anybody from private wants to connect to public ip.
But they cant connect using private ip, So use routers public ip.

1. iptables -t nat -A PREROUTING -p tcp --dport 22 -j  SNAT      --to-source 10.0.0.1

2. From 10.0.0.20
   # ssh 10.0.0.10
   # ifconfig 


3. iptables -t nat -L PREROUTING    

4. iptables -t nat -F PREROUTING    












If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

RH 253: HOW TO CONFIGURE SENDMAIL

1>> TO CONFIGURE SMTP

1. vim /var/named/forward.zone  (Dns should resolve mail server)
   server          IN MX 5         server.example.com.

2. service named restart

3. host -t MX server.example.com

4. yum install sendmail-cf -y

5. vim /etc/mail/sendmail.mc
    line 115 ->comment
    line 155 -> put your domain name

6. make -C /etc/mail

7. service sendmail restart

Verify -> netstat -tlpn |grep :25  (uses loopback after configuration uses ip)

2>> TO SEND  MAILS

A> Using telnet
->  telnet server.matrix.com  25
  -> mail from:u1@server.matrix.com
  -> rcpt to: u2@server.matrix.com
  -> data
  -> subject: hello
  -> aaaaaaaaaaaaaaaaaaaaaaaaaa
     aaaaaaaaaaaaaaaaaaaaaaaaaa 
 (then press enter and . to send)
     quit

B> Using MAIL command
->  mail u1@server.matrix.com
    aaaaaaaaaaaaaaaaaaaaaaaaaa  
  (again . to send mail)

C> Using MUTT command
-> mutt  u1@server.example.com


3>> TO CHECK MAILS

1. su - <user>
   mail

2. mail -u <user>

3. tailf /var/spool/mail/<user>



LOCAL HOST NAMES



just put your domain name here

1. server.matrix.com
2. service sendmail restart


ALIASES


1>>  TO SET ALIASES TO USER,

Mail sent to a virtual group to be received by all users of virtual group


1. vim /etc/aliases
   admin:   u1,u2

2. newaliases

3. mail admin@server.matrix.com

4. mail -u u1
5. mail -u u2           
->both would have received same mail




    

 VIRTUSER TABLE

Mail sent to u1 should be redirected to u2.


1.  vim /etc/mail/virtusertable
    u1@virtual.matrix.com        u1@server.matrix.com

2.  vim /etc/mail.local-host-names
     server.matrix.com
     virtual.matrix.com

3. make -C /etc/mail

4. service sendmail restart

5. mail u1@virtual.matrix.com

6. mail  -u    admin                ->Receives mail

Any mail sent user of host virtual.matrix.com is received by admin user of server.matrix.com


ACCESS


TO RESTRICT OR ALLOW ACCESS TO CERTAIN USERS/DOMAIN

1a. To  Reject mails FROM this IP
   ->vim /etc/mail/access
   192.168.0.45            REJECT        ->This IP cant send/receive mails

b. make -C  /etc/mail
c. service  sendmail restart
d. -> telnet  server.matrix.com  25           (Try this frm 192.168.0.45 machine)
   mail from:u2@server.matrix.com             ->Not Allowed


2a. To  Reject mails FROM this Domain
     ->vim /etc/mail/access
     192.168.0               REJECT        ->Any ips frm this domain cant access

2b.  make -C  /etc/mail
2c.  service sendmail restart
2d.  telnet  server.matrix.com  25          
     mail from:u2@server.matrix.com         ->Not Allowed


3a. To  Reject mails TO u1
   ->vim /etc/mail/access
   TO:u1@server.matrix.com     REJECT        ->u1 cant receive mail

3b.  make -C  /etc/mail
3c.  service sendmail restart
3d.  telnet  server.matrix.com  25          
     mail from:u2@server.matrix.com   ->ok
     rcpt to  :u1@server.matrix.com   ->FAIL


4. To  Reject mails FROM u1
-> vim /etc/mail/access
   FROM:u1@server.matrix.com   REJECT        ->u1 cant send mail

4b.  make -C  /etc/mail
4c.  service sendmail restart
4d.  telnet  server.matrix.com  25          
     mail from:u1@server.matrix.com   ->FAIL
  

5. To  Reject mails FROM u1 with a ERROR
-> vim /etc/mail/access
   FROM:u1@server.matrix.com   ERROR:STUPID  ->display error message

5b.  make -C  /etc/mail
5c.  service sendmail restart
5d.  telnet  server.matrix.com  25          
     mail from:u1@server.matrix.com   -> Get error message
   


GENERICS TABLE

 TO MASQUERADE THE FROM ADDRESS OF MAIL

1. vim /etc/mail/sendmail.mc   
 (Add below lines to sendmail.mc file)
   MASQUERADE_AS(`suma.virtual.com')dnl     ->edit hostname
   FEATURE(masquerade_envelope)dnl          ->uncomment
   FEATURE(masquerade_entire_domain)dnl     - uncomment
   MASQUERADE_DOMAIN(suma.virtual.com)dnl    ->edit hostname
   FEATURE(genericstable)dnl                 ->write below 3 lines   
   FEATURE(always_add_domain)dnl
   GENERICS_DOMAIN_FILE(/etc/mail/local-host-names)dnl


2. vim /etc/mail/local-host-names
    server.example.com
    suma.virtual.com

3.  vim /etc/mail/genericstable
    @server.matrix.com             admin@suma.virtual.com

4. make -C /etc/mail

5. service sendmail restart

6.  mail  u1@server.matrix.com

7. mail -u u1        ->mail appears to come from admin@suma.virtual.com   thou mail was actually sent from root@server.matrix.com   


DOVECOT

TO CONFIGURE DOVECOT

1.yum install dovecot  -y
2.vim /etc/dovecot.conf
   uncomment line 17
3.service dovecot restart


TO CHECK MAIL USING POP3

1. telnet server.matrix.com  110
   user  <username>                ->Type user and provide username
   pass  <password>                ->Type pass and provide password
   list                            ->List the mails
   retr 1                          ->Read the mail
   quit

2. mutt -f pop3://u1@server.matrix.com


TO Check mail using IMAPS AND POP3S (Secured)

1. cd /etc/pki/tls/certs
2. make dovecot.pem
3. cp dovecot.pem  /etc/pki/tls/certs/private
4. cp dovecot.pem  /etc/pki/tls/dovecot/private
5. vim /etc/dovecot.conf
   uncomment line 87,88
6. service dovecot restart

2> mutt  -f imaps://u1@server.matrix.com
 












If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

RH 253; SYS LOG SERVER

1. To Configure Syslogserver

a. vim  /etc/sysconfig/syslog
   sysLOGD_OPTIONS = "-r"

b. service syslog restart

c. tailf /var/log/message


2. To redirect all clients log message 
    to file called remote

   vim /etc/syslog.conf
   *.*    /var/log/remote   

    Clients to redirect there logs to      syslogserver(192.168.0.45)


--> vim /etc/syslog.conf
    *.*      @192.168.0.45


--> service syslog restart
    

 3.    /etc/logrotate.conf

. rotate
  daily

.



If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

RH 253: HOW TO INSTALL AND USE TELNET-SERVER

    TO INSTALL AND USE TELNET-SERVER


1. yum install xinetd
2. yum install telnet-server
3. service xinetd restart
4. chkconfig xinetd on
5. chkconfig --list all  |grep telnet
6. chkconfig telnet on


1. To connect to telnet server
---> telnet  <server.ip>
     Login:  user1
    passwd:  1



2. To Allow only particular client to connect to your server
--->  vim /etc/xinetd.d/telnet
      only_from =<clients.ip>        -->only this client is allowed to telnet



3. To stop a Client to access any type of xinetd based application
--> vim /etc/xinetd.conf
    no_access =<clients.ip>   ->this client cant access any xinetd application
--> service xinetd restart
---> telnet  <server.ip>        ->Not allowed



4. To stop a Client to access xinetd services in particular time
--> vim /etc/xinetd.conf
    access_times=10.00-12.00
--> service xinetd restart
---> telnet  <server.ip>        ->Not allowed if its not 10.00 to 12.00
---> telnet  <server.ip>        ->Allowed if time is b/w 10.00 to 12.00


--> tailf /var/log/secure     ->to check client connecting to your server.
     



  PORT MONITORING TOOLS

--->   SHOWS all applications running in local machine:

1. pkg:-net-tools-1.60-73             -> installed by default

   netstat  -tulpn  |grep <service>

   t->tcp  u->udp  l->listening  p->pid  n->numericip


2. pkg:-nmap-4.11-1.1           -> installed by default

   nmap   <ip.address>   |grep <service>


--->   SHOWS all applications running in entire network:


1. yum  install  wireshark
   Applications-->Internet-->wireshark-->capture
 
2. pkg:-tcpdump-3.9.4-11.el5       -> installed by default

   tcpdump  -c  <ip.address>   |grep <service>



If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

RH 253: HOW TO SET UP SUBDOMAIN SERVER

    TO SET UP SUBDOMAIN SERVER

MASTERS MACHINE

1. vim /var/named/forward.zone
   subdomain.llc   IN NS           server.matrix.com.
2. service network restart


 SUBDOMAIN MACHINE

1. yum install bind caching-nameserver -y
2. vim /etc/named.conf                        ->edit this file
3. named-checkconf   /etc/named.conf
4. cd /var/named
5. cp localhost.zone  forward.zone
6. vim forward.zone                               ->edit this file
7. named-checkzone  <domainname>   forward.zone
8. cp forward.zone reverse.zone
9. vim reverse.zone                               ->edit this file
10. named-checkzone  <domainname>   reverse.zone 
13.vim /etc/resolv.conf                          ->edit this file
14.service named restart
15.chkconfig named on

CLIENT

1. vim /etc/resolv.conf    ->edit the file
2.  dig       <hostname>
3.  host      <hostname>
4.  host      <IP>
5.  nslookup  <IP>
6.  nslookup  <hostname>



 CONFIGURATION FILES


1.  masters-forward


$TTL    86400
@        IN SOA    server.example.com.       root (
                    45        ; serial (d. adams)
                    3M        ; refresh
                    3M        ; retry
                    1W        ; expiry
                    1D )        ; minimum

            IN NS        server.example.com.
            IN NS        llc.subdomain.example.com.
server         IN A            192.168.0.42
slave         IN A            192.168.0.10
llc.subdomain    IN A            192.168.0.33
test         IN A            192.168.0.1



2.  subdomain-forward

$TTL    86400
@        IN SOA     llc.subdomain.example.com.      root (
                    42        ; serial (d. adams)
                    3H        ; refresh
                    15M        ; retry
                    1W        ; expiry
                    1D )        ; minimum

            IN NS           llc.subdomain.example.com.   
llc         IN A        192.168.0.33
client1         IN A        192.168.0.30
client2         IN A        192.168.0.31
client3         IN A        192.168.0.32

3.  subdomain-named


options {
directory "/var/named";
forwarders { 192.168.0.42; };
};

zone "subdomain.example.com"{
type master;
file "forward.zone";
};

zone "0.168.192.in-addr.arpa"{
type master;
file "reverse.zone";
};


4.   subdomain-resolv

nameserver 192.168.0.33


5. subdomain-reverse


$TTL    86400
@        IN SOA     llc.subdomain.example.com.      root (
                    42        ; serial (d. adams)
                    3H        ; refresh
                    15M        ; retry
                    1W        ; expiry
                    1D )        ; minimum

            IN NS           llc.subdomain.example.com.   
33            IN PTR           llc.subdomain.example.com.   
30            IN PTR           client1.subdomain.example.com.   
31            IN PTR           client2.subdomain.example.com.   
32            IN PTR           client3.subdomain.example.com.   



If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

HOW TO CONFIGURE SVN SERVER

STEPS TO CONFIGURE SVN


METHOD  1 : Using  SVN SERVE config file.



Create seperate partion for SVN repo.

vim /etc/yum.repos.d/client.repo
[Server]
name=rhel5
baseurl=file:///media/Server
enable=1
gpgcheck=0

Create client.repo file.
Cp SVN rpms and files from test Server.



vim /etc/yum.repos.d/client.repo
yum clean all
yum install httpd* mod_ssl

cd /opt/

rpm -ivh neon-0.28.4-1.x86_64.rpm neon-devel-0.28.4-1.x86_64.rpm
rpm -Uvh sqlite-3.5.9-2.x86_64.rpm sqlite-devel-3.5.9-2.x86_64.rpm

yum remove subversion

OR


rpm -Uvh subversion-1.6.15-1.rhel5.x86_64.rpm       subversion-python-1.6.15-1.rhel5.x86_64.rpm
rpm -Uvh subversion-perl-1.6.15-1.rhel5.x86_64.rpm  subversion-devel-1.6.15-1.rhel5.x86_64.rpm
rpm -Uvh mod_dav_svn-1.6.15-1.rhel5.x86_64.rpm
rpm -Uvh subversion-tools-1.6.15-1.rhel5.x86_64.rpm --nodeps


cd /opt
cp -ap httpd.conf /etc/httpd/conf/
cp -ap ldap.conf  /etc/openldap/ldap.conf

vim /etc/httpd/conf/httpd.conf   
vim /etc/openldap/ldap.conf


svnadmin  create /svn/test
setfacl -R -m u:apache:rwx /svn/test
vim /etc/httpd/conf/svnserve.conf  EDIT


service httpd restart
elinks https://172.22.201.103/svn/test
 

CONFIGURATION FILES

httpd.conf

#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# Don't give away too much information about all the subcomponents
# we are running.  Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens OS

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile run/httpd.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 600

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 20

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# ServerLimit: maximum value for MaxClients for the lifetime of the server
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers       16
MinSpareServers    10
MaxSpareServers   20
ServerLimit      500
MaxClients       500
MaxRequestsPerChild  4000
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers         10
MaxClients         150
MinSpareThreads     25
MaxSpareThreads     75
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
#Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule version_module modules/mod_version.so
#SVN modules
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so

#
# The following modules are not loaded by default:
#
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule asis_module modules/mod_asis.so

#
# Load config files from the config directory "/etc/httpd/conf.d".
#
Include conf.d/*.conf

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On


#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don't use Group #-1 on these systems!
#

User apache
Group apache

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin root@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
ServerName suma.mindtree.com:80

#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/www/html">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
    Options Indexes FollowSymLinks ExecCGI MultiViews

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid.  This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#
<IfModule mod_userdir.c>
    #
    # UserDir is disabled by default since it can confirm the presence
    # of a username on the system (depending on home directory
    # permissions).
    #
    UserDir disable

    #
    # To enable requests to /~user/ to serve the user's public_html
    # directory, remove the "UserDir disable" line above, and uncomment
    # the following line instead:
    #
    #UserDir public_html

</IfModule>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var index.cgi wsvn.php

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
#   MIMEMagicFile /usr/share/magic.mime
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
#
#EnableSendfile off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
# requires the mod_logio module to be loaded.
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/access_log common

#
# If you would like to have separate agent and referer logfiles, uncomment
# the following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# For a single logfile with access, agent, and referer information
# (Combined Logfile Format), use the following directive:
#
CustomLog logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"

############### added by srivathsa #############
#Alias /websvn "/svn"

<Directory "/var/www/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# WebDAV module configuration section.
#
<IfModule mod_dav_fs.c>
    # Location of the WebDAV lock database.
    DAVLockDB /var/lib/dav/lockdb
</IfModule>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
#
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default.  To use the
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz

#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz

# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler cgi-script .cgi

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /var/www/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#

Alias /error/ "/var/www/error/"

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
    <Directory "/var/www/error">
        AllowOverride None
        Options IncludesNoExec
        AddOutputFilter Includes html
        AddHandler type-map var
        Order allow,deny
        Allow from all
        LanguagePriority en es de fr
        ForceLanguagePriority Prefer Fallback
    </Directory>

#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully

#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable a cache of proxied content, uncomment the following lines.
# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details.
#
#<IfModule mod_disk_cache.c>
#   CacheEnable disk /
#   CacheRoot "/var/cache/mod_proxy"
#</IfModule>
#

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
#

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>


###########Edited by Rajesh for SVN & WebSVN Access##########

#Errorlog logs/svn_error.log
#CustomLog logs/svn_log "%u \"%{SVN-ACTION}e\" %t" env=SVN-ACTION

<Location /svn>
AuthBasicProvider ldap
DAV svn
#SVNAllowBulkUpdate On
SVNParentPath /svn
AuthzLDAPAuthoritative off
AuthType Basic
AuthName "'Enter your MindTree Login-ID & Password'"
#AuthLDAPURL ldap://172.22.192.25:389/dc=mindtree,dc=com?sAMAccountName?sub?(objectCategory=CN=Person,CN=Schema,CN=Configuration,DC=mindtree,DC=com)
AuthLDAPURL ldap://172.22.192.2:3268/dc=mindtree,dc=com?sAMAccountName?sub?(objectCategory=CN=Person,CN=Schema,CN=Configuration,DC=mindtree,DC=com)
AuthLDAPBindDN "cn=LinLdap,ou=IS Accounts,ou=Service Accounts,ou=IS Team,ou=Asia Pacific,dc=mindtree,dc=com"
AuthLDAPBindPassword 241108Ldap

AuthzSVNAccessFile /etc/httpd/conf/svnserve.conf

Satisfy any
Require valid-user

</Location>

<Location /wsvn>
AuthBasicProvider ldap
DAV svn
SVNParentPath /svn
AuthzLDAPAuthoritative off
AuthType Basic
AuthName "'Enter your MindTree Login-ID & Password'"
AuthLDAPURL ldap://172.22.192.2:3268/dc=mindtree,dc=com?sAMAccountName?sub?(objectCategory=CN=Person,CN=Schema,CN=Configuration,DC=mindtree,DC=com)
#AuthLDAPURL ldap://172.22.192.25:389/dc=mindtree,dc=com?sAMAccountName?sub?(objectCategory=CN=Person,CN=Schema,CN=Configuration,DC=mindtree,DC=com)
AuthLDAPBindDN "cn=LinLdap,ou=IS Accounts,ou=Service Accounts,ou=IS Team,ou=Asia Pacific,dc=mindtree,dc=com"
AuthLDAPBindPassword 241108Ldap
SVNPathAuthz off
AuthzSVNAccessFile /etc/httpd/conf/svnserve.conf

Satisfy any
Require valid-user
</Location>

#############################################################


ldap.conf


#
# LDAP Defaults
#

# See ldap.conf(5) for details
# This file should be world readable but not world writable.

#BASE    dc=example, dc=com
#URI    ldap://ldap.example.com ldap://ldap-master.example.com:666

#SIZELIMIT    12
#TIMELIMIT    15
#DEREF        never
URI ldap://127.0.0.1/
BASE dc=example,dc=com
TLS_CACERTDIR /etc/openldap/cacerts


REFERRALS off
 



If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

HOW TO CREATE BUGZILLA DATABASE

1. To create Bugzilla database, once bugzilla server is configured.


   # ssh user@172.22.xx.xx

  (Provide user Password)


   # su - root         (Provide roots password)

   #cd  /bugzilla/bugzilla


   #export PROJECT=<bugzilla-db-name>


   #cp   localconfig.<olddb>   localconfig.<newdb>


   #vim  localconfig.<newdb>  

   //Update  new-databasename


   #./checksetup.pl   

  //Provide mail-id,name,newpassword  when it asks)


   #vi /etc/httpd/conf.d/bugzilla.conf   

 //copy-paste template, Edit 1st n 4th line to dbname.


   #/etc/init.d/httpd reload


   #ln -s /bugzilla/bugzilla  /var/www/html/<db>


Open any browser and check the database creation with the URL


    https:/172.22.xx.xx/<bugzilla-dbname>


1. Goto Parameters --> User Authentication --> requirelogin  Change the value to "on"  to restrict anonymous users to view other than front page


2. Goto Parameters --> User Authentication --> createemailregexp   Leave the value "blank" so that only administrator can create accounts

3. Goto Parameters --> Required Settings --> urlbase
   #https://bugzilla.xyz.com/databasename
   https://bugzilla.xyz.com/DSP/


4. Goto Parameters --> Required Settings -->upgrade_notification   Change the valuedisabled, to restrict connection to remote servers


5. Got to Parameters --> Required Settings -->maintainer   Add the Admin Mail-ID in the box


6. Goto Parameters --> Email --> mailfrom
   change the value tobugzilla

7. Goto Parameters --> Bug Fields --> usetargetmilestone   change the value to on


1. Queries need to be done only if logins are successful


2. Default admin name needs to be set


3. default url needs to be _https://bugzilla.xyz.com/xxxx/  administrator settings   and default preferences


4. Testopia links need to be turned off


5. Default quotes need to be turned off


6. When a bug is changed, the updated bug needs to be shown.


7. Size of attachments need to be set to '0' => no size limit


If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!

HOW TO UPGRADE BUGZILLA

If you found this post useful, I would really love it, if you can Like the Page, or share it with your Facebook/Google+/Twitter Friends... It will keep me motivated. Thank you!